Kundomdöme på Prisjakt:
 8.27 / 10
Läs våra omdömen
Hjem » Ikke kategoriserede produkter » GNSS Beidou Galileo Glonass GPS NL-8004U u-blox 8 USB roof mount 4,50
GNSS Beidou Galileo Glonass GPS NL-8004U u-blox 8 USB roof mount 4,50


GNSS Beidou Galileo Glonass GPS NL-8004U u-blox 8 USB roof mount 4,50

Pris: 1.399kr.
Antal Køb
Tip en ven
Køb senere?
  • Produktinformation

    Navilock NL-8004U USB 2.0 Multi GNSS Receiver, u-blox 8, 4,5m cable length, IP7x, black

    The USB 2.0 multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The NL-8004U GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design. 

    • Connector: USB 2.0 Type-A male
    • Chipset: u-blox 8 UBX-M8030-KT
    • Frequency:
      GPS: L1, 1575.4200 MHz
      GLONASS: L1, 1602 (k x 0,5625) MHz
      BEIDOU COMPASS: B1, 1561.0980 MHz
      GALILEO E1, 1575.4200 MHz
      QZSS L1, 1575.4200 MHz
    • Accepts the signals of up to 72 satellites at the same time
    • Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
    • Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
    • Auto Baud Rate up to 115200 bps
    • Update rate:
      single GNSS: 18 Hz (e.g. GPS solo)
      multi GNSS: 10 Hz (e.g. GPS+GLONASS)
    • Sensibility max. -167 dBm
    • IPX7 protection class
    • LED-indicator for GPS status
    • Operating temperature: -20 °C ~ 60 °C
    • Power supply: 5 V DC
    • Current consumption: max. 45 mA
    • Cold start in ca. 26 seconds
    • Hot start in ca. 1 second
    • Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
    • Cable length: ca. 4.5 m
    • Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm

    Microsoft Sensor and Location Platform (Website)
    • Profit from Windows applications (e.g. weather, maps, etc)
    • Supporting the GNSS location platform API (32 bit) 

    System requirements
    • Windows Vista/7/8/8.1/10, Linux Kernel 2.6
    • PC or laptop with a free USB Type-A port
    • For devices with OTG function and optional OTG adapter: Windows 10 

    Package content
    • USB 2.0 receiver
    • Mounting material: stainless steel nut and washer
    • Navilock support CD incl. driver and user manual 

    Fordele ved
    • Fri fragt – ved køb over 700 kr.
    • Hurtig levering – leveringstiden fremgår i kassen
    • Returret – 100 dages åbent køb
    • Faktura 0 kr. – ingen faktureringsafgift
    • Sikkerhed – vi er certificerede af Trygg E-handel - Home electronics for everyone!